节点文献

铜尾矿入窑生产配比优化研究

Study on Optimization and Regulation of Copper Tailings into Kiln Production Ratio

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 柴天红黄欢欢胡彪曾亮

【Author】 Chai Tianhong;Huang Huanhuan;Hu Biao;Zeng Liang;Jiangxi Building Materials Research and Design Institute Co.Ltd.;

【机构】 江西省建材科研设计院有限公司

【摘要】 利用铜尾矿作为水泥硅质原料,通过优化原料配比,研究了不同原料配比的生料易烧性、熟料的矿物组成、微观形貌和力学性能,冶金危废对熟料重金属元素浸出量的影响。结果表明,适量的铜尾矿的掺入不会影响所制备的熟料矿物组成,同时可以有效改善生料的易烧性能。当硅率值为RSM=2.70时,试样抗折、抗压强度会略低于基准值,但降低幅度较小,对力学性能没有明显的影响,表明铜尾矿具备替代水泥硅质原料煅烧熟料的潜能。

【Abstract】 In this study, Jiangxi characteristic metallurgical hazardous waste copper tailings were used as cement silicon raw materials, and through optimizing the ratio of raw materials, the flammability of raw materials with different ratio of raw materials, mineral composition,microstructure and mechanical properties of clinker, and the influence of metallurgical hazardous waste on the leaching amount of heavy metal elements of clinker were studied. The results show that the incorporation of appropriate copper tailings will not affect the mineral composition of the prepared clinker, and can effectively improve the flammability of raw material. When the silicon ratio value is RSM = 2.70, the flexural and compressive strength of the sample will be slightly lower than the benchmark, but the reduction range is relatively low, which has no obvious effect on the mechanical properties, indicating that the copper tailings has the potential to replace the calcined clinker of the silicon cement raw material.

【基金】 水泥窑协同处置江西特色冶金危废关键技术研究及危废水泥建材产品全生命周期安全性评价[20202BBGL73077]
  • 【分类号】TD926.4;TQ172.6
  • 【下载频次】5
节点文献中: 

本文链接的文献网络图示:

本文的引文网络