【摘要】 本文根据吊舱推进船舶在静水工况中的自航仿真模拟方法，通过装载2种不同螺距比的吊舱推进器，分析比较对应豪华邮轮船模-吊舱推进器在静水工况中固定自航点状况下的推进效率值，进而确定使船模推进性能最佳的吊舱推进器。针对某大型豪华邮轮的吊舱推进器，基于STAR-CCM+仿真软件对螺距比不同的2个吊舱推进器进行敞水性能仿真，并比较分析这2种吊舱推进器敞水效率，得出2号吊舱推进器比1号吊舱推进器敞水性能提升了4.334%。对邮轮船模进行阻力预测仿真，预测豪华邮轮在设计工况下的船舶阻力，对装载2种吊舱推进器的邮轮船模进行自航数值仿真，分析2种吊舱推进器对邮轮推进性能的影响。结果表明，在静水工况拟定的自航点工况下即吊舱桨转速为132.4 r/min，船模航速为10.408 m/s时，装载2号吊舱推进器豪华邮轮在静水条件下的推进效率比1号吊舱推进器增加2.580%。更多还原

【Abstract】 This paper aims to analyze and compare the corresponding luxury cruise ship model-pod propeller in still water conditions by loading two pod propellers with different pitch ratios according to the self-propelled simulation test method of a pod propelled ship in still water conditions. Fix the propulsion efficiency value under the condition of fixed selfhome point, and then determine the pod propeller that makes the ship model propulsion performance the best. Aiming at the pod propeller of a large luxury cruise ship, based on the STAR-CCM+ simulation software, two pod propellers with different pitch ratios were simulated in open water, and the open water efficiency of the two pod propellers was compared and analyzed. The open-water performance of the No. 2 pod thruster is 4.334% higher than that of the No. 1 pod thruster. Carry out resistance prediction test simulation on cruise ship model, predict the ship resistance of luxury cruise ship under design conditions, carry out self-propelled test simulation on cruise ship model loaded with two pod propellers, and analyze the propulsion of cruise ship by two pod propellers Performance impact. The results show that the propulsion efficiency of the luxury cruise ship with No. 2 pod propeller under static water conditions is higher than that of the pod propeller at 132.4 r/min and the model ship speed at 10.408 m/s under the conditions of the self-propelled point prepared under the static water conditions. No. 1 pod thruster increased by 2.580%.更多还原