【摘要】 为提高压电叠堆在低频振动下收集的能量，将压电蜂鸣片周边固支附着在压电叠堆和质量块之间，设计了一种压电叠堆-蜂鸣片复合俘能器。通过分析复合俘能器的动力学模型，给出了俘能器结构参数选取方法。结果表明：蜂鸣片一方面作为弹簧可以降低俘能器谐振频率，提高叠堆俘能功率；另一方面作为俘能器能够收集能量；在124 Hz, 10 m/s~2的振动条件下，蜂鸣片和叠堆发出功率分别为4.94 mW,3.44μW,能够使蓝牙温湿度计连续工作。更多还原

【Abstract】 In order to increase the harvesting power of piezoelectric stack under low-frequency vibration, a piezoelectric buzzer is peripheral fixed between piezoelectric stack and mass.A piezoelectric stack-buzzer composite energy harvester is designed.By analyzing the dynamic model of the composite energy harvester, a method for selecting structural parameters is given.The results show that: the buzzer can be used as a spring to reduce the resonance frequency of the energy harvester and increase the harvesting power of the stack; in addition, it can collect energy as an energy harvester.In vibration condition of 10 m/s~2 at 124 Hz, the output power of the buzzer and the stack are 4.94 mW and 3.44 μW respectively, which can make the Bluetooth thermometer and hygrometer work continuously.更多还原