节点文献

四氢糠醇己基醚的制备及其在阴离子聚合物合成中的应用研究

Preparation of Tetrahydrofurfuryl Alcohol Hexyl Ether and Its Application in Anionic Polymerization

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 邢立江张新军张建国

【Author】 XING Lijiang;ZHANG Xinjun;ZHANG Jianguo;SINOPEC Baling Petrochemical Company;Beijing Research and Design Institute of Rubber Industry Co.,Ltd;

【机构】 中国石化巴陵石化公司合成橡胶事业部北京橡胶工业研究设计院有限公司

【摘要】 以四氢糠醇(THFA)、氢氧化钠(NaOH)和氯代正己烷(NHC)为原料合成四氢糠醇己基醚(THE),并对其作为结构调节剂在阴离子聚合物合成中的应用进行研究。结果表明:在THFA/NaOH物质的量比为(2.5~3.0)/1、NaOH/NHC物质的量比为1/(1~1.05)、类似酯化的反应温度为125~140℃和反应时间为5~5.5 h、取代反应温度为20~40℃和反应时间为2 h的条件下,NHC转化率大于98%,THE收率大于95%,提纯后THE质量分数大于0.99;THE分别在溶聚丁苯橡胶、氢化苯乙烯-丁二烯-苯乙烯嵌段共聚物和高乙烯基聚丁二烯橡胶的合成中用作结构调节剂,3种聚合物的乙烯基质量分数可有效控制在0.35~0.78。

【Abstract】 Tetrahydrofurfuryl alcohol hexyl ether(THE) was synthesized from tetrahydrofurfuryl alcohol(THFA),sodium hydroxide(NaOH) and n-hexane chloride(NHC),and its application as a structural regulator in the anionic polymerization was studied. The results showed that when the molar ratio of THFA/NaOH was(2. 5 ~ 3. 0)/1,the molar ratio of NaOH/NHC was 1/(1 ~ 1. 05),the esterification reaction was carried out at the temperature of 125~140 ℃ for 5~5. 5 h,the substitution reaction was carried out at 20~40 ℃ for 2 h,the conversion of NHC was more than 98%,the yield of THE was more than 95%,and the mass fraction of the purified THE was more than 0. 99. THE was used as a structural modifier in the synthesis of solution polymerized styrene butadiene rubber,hydrogenated styrene-butadiene-styrene block copolymer and high vinyl polybutadiene rubber respectively. The vinyl content of the three polymers could be effectively controlled within 0. 35~0. 78.

  • 【文献出处】 橡胶工业 ,China Rubber Industry , 编辑部邮箱 ,2021年05期
  • 【分类号】TQ317
  • 【被引频次】2
  • 【下载频次】119
节点文献中: 

本文链接的文献网络图示:

本文的引文网络