【摘要】 为研制矿山呼吸性粉尘浓度个体监测仪,采用MIE光散射方法,试制以红外线发光二极管作为光源的呼吸性粉尘浓度个体监测仪,该监测仪主要由气路部分、光路部分及电路部分组成。利用中国安全生产科学研究院自制的粉尘简易试验装置,在气体流量为2 L/min、颗粒粒径不大于5μm的条件下,研究试制仪器电压输出值和流入粉尘质量浓度二者的对应关系。结果表明:根据不同粉尘质量浓度下的输出电压数据,在0～300 mg/m~3测量范围内,试制仪器输出电压值和粉尘浓度之间具有线性函数关系,说明呼吸性粉尘浓度个体监测仪是合理可行的;粉尘监测仪测试结果与比对仪器测量结果对比分析可知,测量误差最大为1.59%,满足粉尘检定规程要求。更多还原

【Abstract】 In order to develop an individual monitor for the concentration of respiratory dust in the mines, the MIE light scattering method was used to trial-manufacture an individual monitor for the concentration of respiratory dust with the infrared light-emitting diodes as the light source, which was mainly composed of a gas path, an optical path, and a circuit.Through using a self-made dust simple test device, the corresponding relationship between the voltage output value of the trial instrument and the mass concentration of the incoming dust was studied under the conditions of a gas flow of 2 L/min and a particle size of not more than 5 μm.The results showed that according to the output voltage data under different mass concentrations of dust, within the measurement range of 0～300 mg/m~3,there was a linear function relationship between the output voltage value of trial-manufactured instrument and the dust concentration, which indicated that the individual monitor for the concentration of respiratory dust was reasonable and feasible.The comparative analysis of the test results by the dust monitor and the comparison instrument showed that the maximum measurement error was 1.59%,which satisfied the requirements of the dust verification regulations.更多还原