【摘要】 利用网格有限体积海洋模式,在非规则网格模型中考虑内潮黏性和自吸-负荷潮联合作用,建立了包括M2、S2、N2、K1、O1、Q1共6个分潮的天体引潮力驱动全球纯动力潮汐模型。在全球潮汐模型结果验证的基础上,系统计算和统计评估全球潮流能平均密度,并给出全球范围内潮流能较大区域的潮流能分布。结果显示,英吉利海峡处存在面积接近33 000 k m2,最大潮流能密度达到1 100 W/m2的大潮流能带;加拿大巴芬岛西侧海域最大潮流能密度超过了1 150 W/m2;阿拉斯加沿海库克湾海域最大潮流能密度达到了500 W/m2;俄罗斯白海入口处潮流能带面积较大,最大潮流能密度达到了500 W/m2;澳大利亚沿海潮流能带面积不大,但数量众多,潮流能密度普遍超过了100 W/m2;中国近海在长江口杭州湾海域以及台北以北海域潮流能密度达到了100 W/m2。更多还原

【Abstract】 Using the Finite-Volume Community Ocean Model(FVCOM) numerical model, considering the combination of parameterization of internal tidal dissipation and self-attraction and loading tide in the unstructured mesh model for the first time, a total of six tide-generation forces including M2、S2、N2、K1、O1、Q1 are established to drive the global forward tidal model. Based on the verification of the global tidal model results, we calculate and statistically estimate average density of the global tidal current energy, and show the tidal current energy distributions where there is greater tidal current energy in the world. The results show that there is a large tidal current energy belt with an area of nearly 33 000 km2 and a maximum tidal current energy density of 1 100 W/m2 lish Channel. The maximum tidal current energy density in the western side of Baffin Island in Canada exceeds1 150 W/m2. The maximum tidal current energy density in the Cook Bay waters of Alaska is 500 W/m2. The tidal current energy belt at the entrance to the White Sea in Russia is large, where the maximum tidal current energy density reaches 500 W/m2. Australia’s coastal tidal current energy belts have small area but large amount, and their tidal current energy density generally exceed 100 W/m2. In China’s offshore waters, the tidal current energy density in the Hangzhou Bay waters of the Changjiang River Estuary and the north of Taipei reaches 100 W/m2.更多还原