节点文献

基于正交试验法的冲压件滑移线数值模拟研究

Numerical simulation research on slide line of stamping parts based on orthogonal test

推荐 CAJ下载
PDF下载
不支持迅雷等下载工具，请取消加速工具后下载。

【Author】 QU Er-hu;LI Ming-zhe;XU Hai-mei;PAN Rui-ming;LI Hu;WEN Ying;WANG Cheng-zhi;LI Dan-tong;Technical Department, Beijing Yatai Automobile Chassis System Co., Ltd.;College of Materials Science and Engineering, Jilin University;School of Materials Science and Engineering, Hebei University of Technology;College of Economics and Management, Tianjin University of Technology and Education;Vehicle Development Department, Yibin Tongji Automobile Research Institute Co., Ltd.;NVH Engineering Development Department, Zhejiang Zotye Automobile Manufacturing Co., Ltd.,Hangzhou branch;SUV research institute, Beijing Automotive Research Institute Co., Ltd.;

【机构】北京亚太汽车底盘系统有限公司技术部；吉林大学材料科学与工程学院；河北工业大学材料科学与工程学院；天津市职业技术师范大学经济与管理学院；宜宾同济汽车研究院有限公司整车开发部；浙江众泰汽车制造有限公司杭州分公司NVH工程开发部；北京汽车研究总院越野车研究院；

【摘要】以某汽车行李箱外板上板为研究对象,基于正交试验,对不同参数下成形的冲压件产生的滑移线进行了数值模拟分析,结果表明:采用正交试验法可快速获得最优成形工艺参数组合,并得出各工艺参数对冲压件滑移线的影响程度,降低了试验次数和成本,提升了工作效率。更多还原

【Abstract】 Taking the outer panel of a car trunk as the research object, based on the orthogonal test, the numerical simulation analysis of the slip line on products formed under different parameters was carried out. The results showed that the orthogonal test could be used to quickly obtain the optimal combination of process parameters, and the influence degree of each process parameter on the slip line of stamping parts was obtained.更多还原

【关键词】滑移线；冲压成形；数值模拟；正交试验；工艺参数；
【Key words】 slip line； stamping forming； numerical simulation； orthogonal test； process parameters；

【文献出处】模具工业 ,Die & Mould Industry , 编辑部邮箱 ,2020年07期

【分类号】TG386
【被引频次】1
【下载频次】128

知网节下载

节点文献中：

本文链接的文献网络图示:

本文的引文网络

节点文献