【摘要】 针对盐湖卤水电解提锂工艺的特性及其电解槽内流体流动的特征,分别研究电解槽进水口位置、流体流量、流体黏度对槽内流场的影响。通过水力学实验与数值模拟对比,验证所采用数学模型的适用性。结果表明:标准k-ε湍流模型能准确的反映槽内流体的流动状况;对于黏度较大的盐湖卤水,为了强化传质,进水口宜开在进水端中间位置,同时,在不破坏涂覆电极的前提下,应尽可能地增大流体流量。更多还原

【Abstract】 According to the characteristics of lithium electrolytic extraction and the fluid flow in the electrolyzer, the effects of the inlet position, fluid flow rate and fluid viscosity on the flow field in the electrolyzer were studied,respectively. Through the comparison of hydraulic experiments and numerical simulation, the applicability of the mathematical model was verified. The results show that the standard k-ε turbulence model can accurately describe the flow state of the fluid in the electrolyzer. Considering the larger viscosity of the salt lake brine, the inlet should be posited in the middle of the water inlet position, and the fluid flow should be increased as much as possible under the premise of without damaging the coated electrode to strengthen the mass transfer.更多还原