节点文献

大断面矩形顶管隧道施工引起的地面沉降分析

Analysis of Ground Subsidence Caused by Construction of Large Section Rectangular Pipe Jacking Tunnel

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李明宇王松张维熙吴鹏

【Author】 LI Mingyu;WANG Song;ZHANG Weixi;WU Peng;School of Civil Engineering,Zhengzhou University;Underground Engineering Safety and Quality Control of Henan Engineering Laboratory;College of Civil Engineering,Tongji University;Zhengzhou University of Aeronautics;

【机构】 郑州大学土木工程学院地下工程安全与质量控制河南省工程实验室同济大学土木工程学院郑州航空工业管理学院

【摘要】 针对郑州市下穿中州大道的双线矩形顶管隧道,通过现场实测对双线隧道施工过程中地面沉降变化规律和分布特征进行分析。研究结果表明:大、小矩形顶管隧道施工对地面沉降的影响范围分别为大、小顶管隧道宽度的1. 4倍和1. 5倍,对刀盘前方土体的扰动范围分别为大、小顶管隧道宽度的1. 3倍和3. 0倍;管节脱离矩形顶管机尾7 d后地面沉降趋于稳定;倒锥形壳体锥度设置过大、前后壳铰接处漏浆和土仓压力设置不合理是诱发地面沉降的关键因素。

【Abstract】 According to the double-line rectangular pipe jacking tunnel under-crossing Zhongzhou Avenue in Zhengzhou,the variation law and distribution characteristics of ground subsidence during the construction of doubleline tunnel were analyzed by field measurement. T he results show that the influence range of large and small rectangular pipe jacking tunnels construction on ground subsidence is 1. 4 times and 1. 5 times of the width of large and small pipe jacking tunnels respectively,the disturbance range of soil in front of cutter head is 1. 3 times and 3. 0 times of the width of large and small pipe jacking tunnel respectively,the ground subsidence tends to be stable seven days after the pipe segment is separated from the rectangular pipe jacking tail. T he key factors inducing ground subsidence are too large taper setting of inverted conical shell, leakage of slurry at hinges of front and rear shells and unreasonable setting of earth pressure.

【基金】 国家自然科学基金(51508520);河南省住房城乡建设科技计划(K-1817)
  • 【文献出处】 铁道建筑 ,Railway Engineering , 编辑部邮箱 ,2019年05期
  • 【分类号】U455.4;P642.26
  • 【被引频次】20
  • 【下载频次】511
节点文献中: 

本文链接的文献网络图示:

本文的引文网络