【摘要】 为建立基于某一服装号型的参数化人体模型,结合GB/T 1335. 1—2008,从人体数据库中筛选出129组170/88A号型的江苏地区男青年人体数据,包括身高、颈椎高、左肩高、腰围高、内胯高、颈围、胸围、胸宽、总肩宽、臂根围、腰围、臀围、体质量13项;采用SPSS统计软件分析数据,找出控制要素,建立回归方程。采用号型中间体法、基本分析法和层次分析法分析人体数据,获得能够覆盖该号型大部分人体尺寸的标准人体内模的各控制要素尺寸。结果显示,结合号型分类和回归方程,可将身高、体质量、胸围、腰围、肩宽作为参数,推断其他控制要素尺寸。控制要素尺寸以号型中间体数值作为参考,结合基本分析法和层次分析法对其进行判断,最终选择代表性数据作为参数化人体模型的控制要素数值。更多还原

【Abstract】 In order to establish a parametric mannequin based on a certain garment size,combining standard of GB/T1335. 1—2008,the body data,including height,cervical height,left acromion height,waist height,perineum point height,neck girth,bust girth,bust width,shoulder width,armhole girth,waist girth,hip girth,body weigh,of 129 young men of type 170/88 A in Jiangsu Province were selected. The SPSS statistical software was used for data analysis to find out the relevant control factors and establish regression equations. In addition,this paper analyzed human body data with the method of medium type intermediate,basic analysis and analytic hierarchy process(AHP),and the size of each control factor of the standard human body model capable of covering most of the human body size of the type was obtained. The results showed that height,weight,chest circumference,waist circumference and shoulder width could be used as parameters to deduce the size of other control factors according to the garment size classification and regression equation. The sizes of the control factor refer to the value of medium type intermediate,and judge by combining the basic analysis method and the analytic hierarchy process. Finally,the representative data is chosen as the control position value of the parametric human body model.更多还原