节点文献

介电弹性体双腔无阀微泵数值仿真分析

Numerical simulation analyses of the dielectric elastomer valveless micropump with double chambers

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 陈洁马小晶孙明郑国华马榕谷

【Author】 Chen Jie;Ma Xiaojing;Sun Ming;Zheng Guohua;Ma Ronggu;College of Electrician Engineering,Xinjiang University;College of Chemistry & Chemical Engineering,Xinjiang University;

【机构】 新疆大学电气工程学院新疆大学化学化工学院

【摘要】 介电弹性体是具有大变形的智能材料,利用其特殊性能研制了介电弹性体双腔三振子无阀微泵,并用FLUENT软件进行三维仿真,得到了不同进口速度条件下的压力分布图、密度分布图、速度矢量图以及速度迹线图。由上述各图可得出以下结论:速度较大的流体对微泵产生的压力越大;微泵内流体的密度与速度大小无直接关系;流道的横截面积越小,速度越大;速度对迹线的影响不大。

【Abstract】 Dielectric elastomer is a smart material which has great deformation performance,by using its special performance,a dielectric elastomer valveless micropump with double chambers and three simple harmonic oscillators was prepared. Using the threedimensional simulation of FLUENT software,the charts of pressure,density,velocity vector and velocity path line were acquired.The conclusions are as follows from the comparison charts: the fluid with high velocity will generate more pressure to micropump,the density of fluid in micropump has no direct connection to fluid velocity,the velocity is higher in passageway where cross sectional area is smaller,and the velocity has little influence on path line.

【关键词】 介电弹性体微泵FLUENT软件仿真
【Key words】 dielectric elastomermicropumpFLUENT softwaresimulation
【基金】 国家自然科学基金项目(51467020,51007077);新疆维吾尔自治区高校科研计划项目(XJEDU2016S031);新疆维吾尔自治区自然科学基金项目(2017D01C085)
  • 【文献出处】 现代制造工程 ,Modern Manufacturing Engineering , 编辑部邮箱 ,2018年05期
  • 【分类号】TB381;TH38
  • 【被引频次】4
  • 【下载频次】209
节点文献中: 

本文链接的文献网络图示:

本文的引文网络