节点文献
辽河三角洲沉积物工程地质特征分析
Analysis of the Liaohe Delta sediment engineering geological characteristics in the Liaohe River
【摘要】 基于小凌河、大凌河、双台子河、大辽河附近的钻孔资料,分析了4条河流附近的沉积物组成以及工程地质特征。结果表明,辽河三角洲地区沉积物为粉土、黏土和砂土为主,在小凌河地区14 m以下地层出现了厚度达16 m的砾石层;辽河三角洲小凌河和大凌河地区浅部地层有一层超过1 m的淤泥层,工程性质较差,除淤泥层外,其他地层含水量一般不超过30%,以中低压缩性土为主;辽河三角洲地区的承载力特征随着深度的增加而增大;在桩径为1 200 mm,壁厚24.0 mm的钢管桩情况下,辽河三角洲地区30 m深度处地层单桩极限承载力的最大值均可达到9 000 k N,但在淤泥层、粉质黏土和黏土层的承载力出现急剧减少的现象,在工程建设中应根据实际情况选择合适的持力层。研究成果对该地区的陆地工程建设和防灾减灾具有重要的指导意义。
【Abstract】 In this paper, the sediment components and engineering geological characteristics around the Xiaolinghe River, the Dalinghe River, the Shuangtaizihe River, and the Daliaohe River are analyzed. The results show that silt, clay, and sand are the main sediments in the Liaohe River Delta area, and there is a 16-m-thick gravel layer 14 m below the strata of the Xiaolinghe River region. The Xiaolinghe River and the Dalinghe River areas each have a silt layer >1 m thick in their shallow strata, as well as poor engineering properties. Excluding the silt layer, the water contents of the other layers are generally not >30%, mainly in the low and medium compressible soil. Subgrade bearing capacity in the Liaohe River Delta increases with depth when the pile diameter and wall thickness are 1 200 mm and 24.0 mm, respectively. The maximum ultimate bearing capacity of a pile at 30 m depth can reach 9 000 k N, but the bearing capacities in the silt layer, silty clay, and clay layers are sharply reduced, so the appropriate bearing layer according to the actual situation should be selected. The research results are highly significant in guiding land construction and disaster prevention and mitigation.
【Key words】 the Liaohe Delta; sediment; engineering geological characteristics; ultimate bearing capacity of single pile;
- 【文献出处】 海洋科学 ,Marine Sciences , 编辑部邮箱 ,2018年03期
- 【分类号】P642.4
- 【被引频次】2
- 【下载频次】104