节点文献

水热制备TiO2纳米管及其光催化性能

Hydrothermal Preparation of TiO2 Nanotubes and Its Photocatalytic Performance

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 吴旭日王辉尤增宇秦天申乾宏杨辉

【Author】 Wu Xuri;Wang Hui;You Zengyu;Qin Tian;Shen Qianhong;Yang Hui;Zhejiang-California International NanoSystems Institute, Zhejiang University;School of Materials Science and Engineering, Zhejiang University;

【通讯作者】 杨辉;

【机构】 浙江大学浙江加州国际纳米技术研究院浙江大学材料科学与工程学院

【摘要】 利用TiO2粉体在高浓度NaOH溶液中水热反应制备TiO2纳米管。采用X射线衍射(XRD)、扫描电镜(SEM),透射电镜(TEM),紫外可见分光光度计(UV-Vis)考察了NaOH浓度、水热反应温度、水热反应时间等因素对TiO2纳米管结构和性能的影响。结果表明:当NaOH浓度为10 mol/L,水热反应温度为160℃,水热反应时间20 h时,所制备的TiO2纳米管显示出较高的光催化活性,经紫外光照30 min后,对甲基橙(MO)的降解率可达75.48%。

【Abstract】 TiO2 nanotubes were prepared through a hydrothermal method with TiO2 power in high concentration NaOH solution. XRD,SEM, TEM and UV-Vis were adopted to analyze as-prepared TiO2 nanotubes. The influence of NaOH concentration, reaction time and temperature on the structure and properties of TiO2 nanotubes were investigated. The results show that the uniform TiO2 nanotubes are obtained under optimum preparation conditions: 10 mol/L of NaOH, 20 h of reaction time and 160 oC of reaction temperature. TiO2 nanotubes exhibit higher photocatalytic activity, and the degradation rate of methyl orange(MO)in aqueous solution reaches 75.48% after UV irradiation for 30 min.

【关键词】 TiO2纳米管水热法光催化
【Key words】 TiO2nanotubehydrothermal methodphotocatalysis
【基金】 国家科技支撑计划项目(2013BAJ10B05)
  • 【文献出处】 稀有金属材料与工程 ,Rare Metal Materials and Engineering , 编辑部邮箱 ,2018年S2期
  • 【分类号】TB383.1;O643.36;O644.1
  • 【下载频次】115
节点文献中: 

本文链接的文献网络图示:

本文的引文网络