【摘要】 基于单光子吸收激光直写技术,成功地制备了大面积阵列分布、一致性可控的纳米孔复合结构。通过一种涡旋相位板的调制,532 nm波段的连续激光在高数值孔径物镜的焦点处形成了一个圆环形光斑,作用于均匀的SU8光刻胶薄膜上,进而制备出形状与大小可控的、具有高深宽比、直径突破阿贝衍射极限的纳米孔结构。通过逐点扫描方法,最终制备出内径仅为入射波长约1/10的纳米孔阵列结构。此外,利用SEM技术研究了曝光光强和曝光时间对纳米孔尺寸和形貌的影响。更多还原

【Abstract】 A large area nanopore array with controllable consistency has been fabricated by direct laser writing(DLW) technique with ultralow one-photon absorption(LOPA). In this technique, a doughnut-shape beam generated by 532 nm continuous-wave laser through a vortex phase plate was focused into the thin film of SU8 photoresist by a high numerical aperture objective. The low absorption of the photoresist at the excitation wavelength allowed controllable fabricating structures with sub-diffraction-limit feature size and high aspect ratio. With point-by-point scanning fabrication, nanopore array with the pore’s internal diameter, about ten percent of incident laser wavelength, far smaller than Abbe’s diffraction limit was achieved. The influences of the exposure intensity and exposure time on the fabricated nanopore size and shape were also investigated by scanning electron microscope(SEM).更多还原