节点文献

交流电脉冲调控Al-7%Si合金中α-Al相形态演化机制

Morphology Evolution Mechanism ofα-Al Dendrite of Hypoeutectic Al-7%Si Alloy Regulated by Low Voltage Alternating Current Pulse

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李宁张利民邢辉张蓉殷鹏飞吴耀燕王娟刘海楠

【Author】 LI Ning;ZHANG Limin;XING Hui;ZHANG Rong;YIN Pengfei;WU Yaoyan;WANG Juan;LIU Hainan;Key Laboratory of Space Applied Physics and Chemistry,Ministry of Education,School of Science,Northwestern Polytechnical University;College of Science,Sichuan Agricultural University;

【通讯作者】 张蓉;

【机构】 西北工业大学理学院空间应用物理与化学教育部重点实验室四川农业大学理学院

【摘要】 研究了低压交流电脉冲下Al-7%Si合金初生α-Al相的微观组织演化规律,数值模拟了合金熔体中的电流及电磁力分布,结合模型中嵌入金属网的方法,对电脉冲调控微观组织的机理进行了分析。结果表明,无论砂型还是金属网内、外,α-Al树枝晶随着脉冲电流密度的增大而更细化,然而部分组织形貌由树枝状向蔷薇状的转变与脉冲电流密度和位置都有关。相同的电脉冲下,当脉冲电流密度足够大时,砂型中与金属网内、外的α-Al相组织形貌存在显著差异。分析认为,初生α-Al相组织的变化主要是由脉冲电磁力驱动的熔体对流作用引起的;此外通过计算熔体流动状态雷诺数,预测了不同密度电脉冲作用下Al-7%Si合金中初生α-Al相的形貌。

【Abstract】 Theα-Al dendrite morphology evolution law of hypoeutectic Al-7% Si alloy under low voltage alternating current pulse(LACP)has been investigated in this paper.The distribution of current pulse and electromagnetic force in the alloy melt were numerically simulated.LACP of different current density was imposed in whole solidification process of the alloy and the wire metal tube was embedded in sand mould to restrain the melt convection.The mechanism of microstructure regulated by LACP was analyzed.The results show that the degree of refining ofα-Al dendrite was aggravated with the increase of current pulse density in casting samples of without wire metal tube and outside of wire metal tube and inside of wire metal tube.However,some ofα-Al dendrites turn into rosiness from dendritic is related to the current density of LACP and location.There were significant differences in the morphology of theα-Al dendrite between casting samples of without wire metal tube and outside of wire metal tube and inside of wire metal tube.The analysis suggests that the change ofα-Al dendrite was caused by melt convection resulted from the pulse electromagnetic force.Theα-Al morphology can be predicted through calculating the Reynolds number of alloy melt,after Al-7% Si alloy was treated with different current density LACP.

【基金】 国家自然科学基金(51704242;51701160)
  • 【分类号】TG146.21
  • 【下载频次】101
节点文献中: 

本文链接的文献网络图示:

本文的引文网络