节点文献

飞溅区挂样位置、高度对钢腐蚀的影响

Influences of Position and Height of Exposure on Corrosion of Steels in Splash Zone

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 杨海洋黄桂桥丁国清杨朝晖

【Author】 YANG Hai-yang;HUANG Gui-qiao;DING Guo-qing;YANG Zhao-hui;Qingdao NCS Testing & Corrosion Protection Technology Co.,Ltd;Qingdao Research Institute for Marine Corrosion;

【机构】 青岛钢研纳克检测防护技术有限公司钢铁研究总院青岛海洋腐蚀研究所

【摘要】 目的研究飞溅区挂样位置、高度对钢腐蚀的影响。方法采用海水飞溅区暴露试验。结果在青岛和三亚获得了5种钢在飞溅区暴露的腐蚀结果。结论在不同海域试验地点的飞溅区暴露,因环境条件不同,钢的飞溅区范围区间有较大差别,腐蚀速率峰值相对平均高潮位的高度也不同。在同一试验地点,暴露位置、条件的不同都会使钢的飞溅区范围区间及腐蚀速率峰值的高度不同。

【Abstract】 Objective To research influences of exposure position and height on corrosion of steels in splash zone. Methods Exposure test was carried out in the splash zone of seawater. Results Corrosion results of five kinds of steel in Qingdao and Sanya were obtained. Conclusion Large difference exists in the corrosion range and peak value of corrosion rate when steels are exposed in different test sites of sea areas because of different environmental conditions. Meanwhile, in the same test site, different exposure position and conditions can cause different range of splash zone and peak value of corrosion rate.

【关键词】 飞溅区暴露试验腐蚀
【Key words】 splash zoneexposure teststeelcorrosion
  • 【文献出处】 装备环境工程 ,Equipment Environmental Engineering , 编辑部邮箱 ,2017年02期
  • 【分类号】TG174.3
  • 【被引频次】1
  • 【下载频次】79
节点文献中: 

本文链接的文献网络图示:

本文的引文网络