【摘要】 通过逐层旋涂的方法,利用MEH-PPV（Poly[2-methoxy-5-（2-ethylhexyloxy）-1,4-phenylenevinylene]与Ir（ppy）₃（tris（2-phenylpyridine）iridium（Ⅲ）））,制备活性层,实现了高性能的电双稳器件。通过改变MEHPPV的浓度,制备了不同器件并进行性能比较,发现所有器件都具有明显的电双稳特性。当MEH-PPV的浓度达到4 mg/mL时,器件的开关比可以达10³。同时,通过测试器件的电流-循环次数研究了器件的持续稳定特性。经过10⁴次的反复读写测试,器件性能依然稳定。最后,通过对器件的Ⅰ-Ⅴ曲线进行线性拟合,并结合器件的能级图,对器件的工作原理进行了研究。结果表明,MEH-PPV/Ir（ppy）₃器件的电双稳特性产生的主要原因是偶极层的形成与破坏。更多还原

【Abstract】 The electrical bistable devices based on poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene](MEH-PPV)/tris(2-phenylpyridine) iridium(Ⅲ) films were fabricated by using the spin-coating method. The devices with different concentrations of MEH-PPV were studied. All the devices have the typical bistability. When the concentration of MEH-PPV is 4 mg/mL,the device has the electrical ON/OFF ratio of about 1 × 10~3. In addition,the current-recycle measurements were taken to investigate the sustained stability performance of the device. The performance of the device remains stable after 10~4 recycles. The fitting of Ⅰ-Ⅴ characteristics was utilized to analyze the charge transport process with the help of the diagram of the energy bands of the device. The results show that the current transition process is attributed to the formation and damage of the interface dipole layer under different voltage biases.更多还原