节点文献

MnOx/SAPO-11催化剂的制备、表征及其低温NH3-SCR活性

Preparation, Characterization and Low-Temperature NH3-SCR Activity of MnOx/SAPO-11 Catalysts

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘小青李时卉孙梦婷喻成龙黄碧纯

【Author】 LIU Xiao-Qing;LI Shi-Hui;SUN Meng-Ting;YU Cheng-Long;HUANG Bi-Chun;College of Environment and Energy, South China University of Technology;Key Laboratory of the Ministry of Education for Pollution Control and Ecosystem Restoration in Industry Clusters,South China University of Technology;

【机构】 华南理工大学环境与能源学院华南理工大学工业聚集区污染控制与生态修复教育部重点实验室

【摘要】 分别采用浸渍法、柠檬酸络合法以及沉淀法在SAPO-11分子筛上负载MnOx,制备了一系列MnOx/SAPO-11催化剂。考察了催化剂的低温NH3选择性催化还原(SCR)(NH3-SCR)NOx的性能。结果表明,沉淀法制备的负载量为20%(w)的MnOx/SAPO-11催化剂表现出最优异的低温NH3-SCR性能及N2选择性。通过X射线衍射(XRD)、扫描电镜(SEM)、能量散射谱(EDS)、原子吸收光谱(AAS)、N2吸附-脱附、X射线光电子能谱(XPS)、H2程序升温还原(H2-TPR)、NH3程序升温脱附(NH3-TPD)以及NO/O2程序升温脱附-质谱(NO/O2-TPD-MS)等多种表征手段对催化剂的结构及表面性质进行分析。表征结果显示,采用不同方法制备催化剂时,其表面MnOx的存在形式和晶相结构不同。沉淀法制备的催化剂表面存在无定型态MnOx以及MnO2晶型,具有较大的介孔及外表面积、更多比例的Mn4+和化学吸附氧,同时表面存在对反应有利的中强酸以及强酸。因此,催化剂在低温SCR反应阶段能够生成重要中间产物NO2,从而表现出最佳低温活性。同时,三种制备方法均能使MnOx相对均匀分散在SAPO-11表面。SAPO-11对催化剂表面MnOx物种的形成具有一定的影响,从而影响催化剂的酸性,拓宽了MnOx的活性温度窗口,提高了催化剂的N2选择性。

【Abstract】 MnOx/SAPO-11 catalysts were prepared by impregnation, citric acid, and precipitation methods for low-temperature selective catalytic reduction(SCR) of NO with NH3. The results indicated that the MnOx/SAPO-11 catalyst with 20%(w) Mn loading prepared by the precipitation method showed the best SCR activity and N2 selectivity. X-ray powder diffraction(XRD), scanning electron microscopy(SEM), energy-dispersive spectrometry(EDS), atomic absorption spectrometry(AAS), N2adsorption-desorption, X-ray photoelectron spectroscopy(XPS), H2temperature-programmed reduction(H2-TPR), NH3temperature-programmed desorption(NH3-TPD),NO/O2temperature-programmed desorption, and mass spectrometry(NO/O2-TPD-MS) were used to analyze the structural properties and catalytic performance of the catalysts. The results indicated that different manganese oxides were formed on the surface of SAPO-11 by the three different preparation methods. MnOxloaded via the precipitation method existed as MnO2 phase and amorphous MnOx. The advantages of the catalyst prepared via this method were a large mesoporous and external surface area, the highest content of chemisorbed oxygen and Mn4+as well as more favorable medium and strong acid sites. Thus, more NO2 was produced on the catalyst during low-temperature SCR, which was a primary goal. MnOx prepared by all three methods could be well-dispersed on the surface of SAPO-11. The dispersive action of SAPO-11 could affect the formation of MnOx, which could affect the acidity of the catalysts. Thus, the temperature window was widened and N2 selectivity was improved compared with pure MnOx, with SAPO-11 acting as an excellent carrier.

【基金】 国家自然科学基金(51478191);广东省省级科技计划项目(2014A020216003)资助~~
  • 【文献出处】 物理化学学报 ,Acta Physico-Chimica Sinica , 编辑部邮箱 ,2016年05期
  • 【分类号】X701;O643.36
  • 【被引频次】24
  • 【下载频次】317
节点文献中: 

本文链接的文献网络图示:

本文的引文网络