节点文献

600MW机组凝汽器喉部加装挡板数值模拟

Numerical Simulation on Condenser Throat Installing Baffles in 600MW Unit

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 周兰欣李姗刘康

【Author】 ZHOU Lan-xin;LI Shan;LIU Kang;The Key Laboratory of Ministry of Education of Condition Monitoring and Control for Power Plant Equipment,North China Electric Power University;

【机构】 电站设备状态检测与控制教育部重点实验室(华北电力大学)

【摘要】 以某600MW机组为例,在考虑内置低压加热器和小汽轮机排汽等附加流体情况下,采用FLUENT软件对凝汽器喉部流场进行数值模拟,提出了在7号、8号低压加热器顶部加装挡板的方法。计算结果表明:凝汽器喉部出口蒸汽流动均匀性系数最高提高了4.1%,平均汽阻减小了9.4Pa,改善了凝汽器内的流场分布,提高了凝汽器换热效果。

【Abstract】 Considering low pressure heater and additional fluid such as inner small turbine exhaust steam in a 600 MW unit,the internal flow field of condenser throat is investigated by using the FLUENT software,and a method of installing baffles on the top of low pressure heater No. 7 and 8 is proposed to improve the internal flow field. The calculation results shows that:after the installation of baffles,the steam flow uniformity coefficient of condenser throat outlet increased by 4. 1%,the average steam resistance reduced 9. 4 Pa,then the flow field distribution of the condenser becomes better,and the heat transfer effect of the condenser is improved.

  • 【文献出处】 汽轮机技术 ,Turbine Technology , 编辑部邮箱 ,2016年04期
  • 【分类号】TM621
  • 【被引频次】3
  • 【下载频次】79
节点文献中: 

本文链接的文献网络图示:

本文的引文网络