【摘要】 对涡喷-6发动机的涡轮及加力燃烧室的虚拟装配系统进行了研究采用Pro/Engineer(Pro/E)软件对部件进行了三维建模,并对装配工艺进行了理论研究。然后,采用VS2008中的MFC设计了一系列人性化的界面,用户可以通过界面上的工具控制按钮选择装配的部件、装配时所需要使用的设备及工具等。最后,使用VS2008和Pro/Toolkit编写装配程序,实现了虚拟装配系统的开发。用户采用该系统可以手动模拟装配的工艺过程,若装配过程中出现顺序错误、工具选择错误、装配不到位等情况,系统能够提示出现的问题并给出相应的解决方案。更多还原

【Abstract】 The virtual assembly system for WP-6 engine was studied.Firstly,the three-dimensional models of components were built using Pro/E.After that,the assembly process was studied in theory.On the basis of theoretical study,a series of user-friendly dialog interface were designed using MFC function in VS2008.Users could use the controlling buttons on the interface to select the components as well as the equipment and tools needed in assembly process.Finally,assembly procedures were written using VS2008 and Pro/Toolkit,and the development of virtual assembly system was finished.With this system,users could simulate the assembly process.If there were mistakes including assembly sequence mistakes,tool selection mistakes,not in appropriate place and so on,the system would remind the problems and give corresponding solutions.更多还原