节点文献

蓖麻籽冷态压榨过程保压时间与出油率的关系及其曲线拟合

Relationship and curve fitting of holding time and oil yield efficiency in process of cold press for castor beans

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘汝宽杨星星肖志红李昌珠张良波黄志辉

【Author】 LIU Rukuan;YANG Xingxing;XIAO Zhihong;LI Changzhu;ZHANG Liangbo;HUANG Zhihui;College of Chemistry & Chemical Engineering,Central South University;Hunan Academy of Forestry;College of Mechanical and Electrical Engineering,Central South University;

【机构】 中南大学化学化工学院湖南省林业科学院中南大学机电工程学院

【摘要】 蓖麻籽是一种重要的高含油(约50%)、高含蛋白(约20%)和低含水(约8%)工业油料。采用液压压榨时,保压时间是影响其出油率的重要因素。本文利用微型直筒式压榨试验装置,在压榨压力25 MPa、压榨速度2.2 mm/s下,开展了蓖麻籽冷态压榨制油保压试验。在分析出油率随保压时间的变化规律的基础上,得到合理的保压时间为20 min;拟合得到保压时间与出油率经验模型及参数,平均相对误差为6.75%,为油料压榨操作条件的优化建立了基础。

【Abstract】 Castor is an important kind of industrial oil plant with high oil content of about 50%,high protein content of about 20% and low moisture content of about 8%. In process of hydraulic press for castor oil,the holding time of pressure is directly related to the oil yield efficiency. Experimental runs for testing effect of pressure holding time on oil yield efficiency were carried out through the micro tube squeezing device under loading pressure of 25 MPa and pressing speed of 2. 2 mm / s. Based on the analysis of relationship between oil yield efficiency and pressure holding time,the optimum holding time of 20 min was obtained. The model for relationship between holding time and oil yield efficiency was established and the parameters were obtained. The average relative error was 6. 75% shown from fitting curve,which gave a support on other operating conditions.

【关键词】 蓖麻籽冷态压榨出油率曲线拟合
【Key words】 castor beanscold pressoil yield efficiencycurve fitting
【基金】 国家林业局林业公益性行业专项(201304608);国家自然科学基金面上项目(31470594)
  • 【文献出处】 湖南林业科技 ,Hunan Forestry Science & Technology , 编辑部邮箱 ,2016年01期
  • 【分类号】TS224
  • 【被引频次】3
  • 【下载频次】46
节点文献中: 

本文链接的文献网络图示:

本文的引文网络