节点文献

Sm3+掺杂Co2Z型铁氧体的组织结构和吸波性能

Microstructures and Microwave Absorbing Properties of Sm3+ Doped Co2Z-type Hexagonal Ferrite

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 郭世海张羊换王煜安静赵栋梁

【Author】 Guo Shihai;Zhang Yanghuan;Wang Yu;An Jing;Zhao Dongliang;Beijing Engineering Laboratory of Advanced Metallic Magnetic Materials and Preparation Techniques,Central Iron and Steel Research Institute;

【机构】 钢铁研究总院先进金属磁性材料及制备技术北京市工程实验室

【摘要】 采用普通陶瓷工艺制备了Sm3+掺杂的Co2Z型平面六角铁氧体,研究了Sm3+掺杂Co2Z型铁氧体材料的组织结构和吸波性能。结果表明,掺杂一定量Sm3+的铁氧体相结构仍以Co2Z型六角晶系相为主相,但出现了呈颗粒状弥散分布的富Sm相。掺杂Sm3+样品的吸波性能明显优于未掺杂Sm3+样品,在频率为6.3 GHz时,其最大反射损耗可达到-20 d B,耗损大于10 d B的频带带宽为5 GHz,具有较宽的吸收频带。吸波涂层的附着强度均大于10 MPa,具有良好的力学性能。

【Abstract】 The Sm3+ doped Co2Z-type hexagonal ferrite materials were prepared by a conventional ceramic method and the influence of Sm3+ addition on structures and microwave absorbing properties of the materials were investigated. The results show that Co2Z-type hexaferrite is still the main phase in the Co2Z ferrite materials doped with Sm3+; however, the Sm-rich phase with granular morphology is dispersed in the main phase. The Sm3+ doped Co2Z ferrite exhibits much better microwave absorbing properties than the Sm3+ undoped one. The maximum reflection loss of Sm3+ doped Co2Z ferrite reaches-20 dB at 6.3 GHz, and the frequency bandwidth of reflection loss more than 10 dB is 5 GHz. The wave absorbing coating has good mechanical properties and the adhesions of the coatings are higher than 10 MPa.

  • 【文献出处】 稀有金属材料与工程 ,Rare Metal Materials and Engineering , 编辑部邮箱 ,2016年12期
  • 【分类号】TM277
  • 【被引频次】7
  • 【下载频次】162
节点文献中: 

本文链接的文献网络图示:

本文的引文网络