节点文献
关节轴承喷涂MoS2/石墨复合涂层摩擦学性能的研究
Study on tribological properties of spraying MoS2/graphite composite coatings of spherical plain bearing
【摘要】 以Mo S2/石墨为固体润滑剂,无机磷酸盐为胶粘剂,利用喷涂方式在GE20ES型关节轴承表面制备不同配比的Mo S2/石墨复合涂层,考察了这些复合涂层在旋转摆动条件下的摩擦磨损性能。结果表明,不同配方的Mo S2/石墨复合涂层均显示了较好的减摩耐磨性能,其中当Mo S2与石墨的配比为3∶1时,Mo S2与石墨有较好的协同效果,复合涂层的摩擦学性能最好。
【Abstract】 The composite coatings with varying proportions of graphite,Mo S2 were sprayed on the surface of GE20 ES spherical plain bearings. The tribological behavior of composite coatings was studied under rotating oscillatory motion. It was found that the composite coatings with varying proportions of graphite,Mo S2 had good wear resistance. The optimum tribological behavior was done when the proportion of Mo S2,graphite was 3∶ 1. There are good synergistic effects in Mo S2 and graphite.
【关键词】 关节轴承;
喷涂;
MoS2;
复合涂层;
摩擦磨损;
【Key words】 spherical plain bearing; spraying; MoS2; composite coating; friction and wear;
【Key words】 spherical plain bearing; spraying; MoS2; composite coating; friction and wear;
【基金】 国家自然科学基金项目(51275155);河南省杰出青年基金项目(114100510002);河南省高校科技创新团队支持计划项目(13IRTSTHN025)
- 【文献出处】 现代制造工程 ,Modern Manufacturing Engineering , 编辑部邮箱 ,2015年06期
- 【分类号】TH133.31;TH117.1
- 【被引频次】11
- 【下载频次】268