采用电晕注极和热注极技术,在厚度为25μm的氟化乙丙烯共聚物(FEP)表面制备了宽度为2 mm和3mm的具有栅型电场分布的驻极体,研究了注极温度和电极宽度对其电荷存储性能的影响.样品注极后经150天的存储,栅型电场分布变得清晰而有规律,覆盖铝电极区电位已衰减至接近零,未覆盖铝电极区仍保持高电位;对电极宽度为2 mm和3 mm的样品,覆盖铝电极区与未覆盖铝电极区的表面电位差分别为110 V和130V(电场强度差分别为44 k V/cm和52 k V/cm).表面电位跟踪测试结果表明:电晕注极样品初始表面电位高于热注极样品;在相同的注极方法下,注极温度越高初始表面电位越高,电极宽度越小初始表面电位越低.依据电晕注极和热注极原理对实验结果的分析表明,FEP和金属铝在电荷存储性能上的差异是FEP表面蒸镀铝电极后能获得栅型电场分布的原因所在.
【英文摘要】
Electret has caught wide attention because it can produce a lasting and stable electrostatic field in the application of MEMS devices such as miniwatt electret generator,electret motor,electret sensor,electret transducer,and so on.Of all the above applications,a remarkable feature is that the electrostatic field distribution on electret surface is patterned in millimeter size or even smaller.However,the charge storage performance of electret in miniature size will dramatically get worse in contrast with the...
| 
推荐 
点击下列相关研究机构和相关文献作者，可以直接查到这些机构和作者被《中国知识资源总库》收录的其它文献，使您全面了解该机构和该作者的研究动态和历史。
