【摘要】 实验采用微弧氧化技术制备了负载Cu2+的二氧化钛/钛(TiO2/Ti)网电极,考察了微弧氧化电解液浓度、光电催化电解质初始浓度、电解间距、外加电压对亚甲基蓝三维光电催化的脱色情况。结果表明,在6g/L的Na3PO4溶液中微弧氧化5min制备TiO2/Ti网电极的光催化效果最高达到25.3%;采用微弧氧化负载Cu2+法修饰TiO2/Ti网电极,当电解液中Cu2+的浓度为0.01mol/L,微弧氧化时间7min时制备的负载Cu2+的TiO2/Ti网电极,在三维光电催化体系为5mg/L的亚甲基蓝,0.01mol/L的硫酸钠溶液,1.5cm的电解间距,3.0V的外加电压以及pH为5的情况下,光电催化对亚甲基蓝的脱色率达到46.2%。更多还原

【Abstract】 The net electrode of(TiO2/Ti) loaded Cu2+ was prepared by micro-arc oxidation. Effect of the micro-arc oxidation electrolyte concentration, photoelectrocatalysis electrolyte concentration and initial photoelectric catalytic electrolysis spacing, applied voltage on the three-dimensional photoelectrocatalytic decolorization of methylene blue was investigated. The results show that photocatalytic effect of titanium mesh prepared by micro-arc oxidation in 6 g/L Na3PO4 solution for 5 min is the best, can reach to 25.3%; after titanium mesh electrode is modified by Cu2+ with micro-arc oxidation method under the conditions of 0.01 mol /L Cu2+ and 7 min micro-arc oxidation time, methylene blue decolorization rate of the three-dimensional photoelectric catalytic system can reach to 46.2% when methylene blue is 5 mg/L, sodium sulfate solution is 0.01 mol/L, electrolytic distance is 1.5 cm, applied voltage is 3 V and pH is 5.更多还原