【摘要】 目的 探讨应用三维扫描技术测量自体脂肪颗粒移植隆乳术后吸收率的可行性。方法 应用三维扫描技术,对30例自体脂肪移植隆乳术的女性进行乳房体积测量,通过测量术前及术后1、3、6个月的乳房体积,计算移植后自体脂肪颗粒的吸收率。结果 术后1、3、6个月时脂肪吸收率分别为(35.21±4.43)%、(52.60±3.18)%、(53.78±3.05)%。术后3、6个月与术后1个月相比,脂肪吸收率差异具有统计学意义(P<0.05);术后3个月与术后6个月相比,其差异无统计学意义(P>0.05)。结论 应用三维扫描技术测量移植自体脂肪吸收率,可为自体脂肪移植隆乳术提供较为客观的临床参考。更多还原

【Abstract】 Objective To explore the feasibility of three dimensional scanning technology in measuring the absorption rate on breast augmentation with autologous fat granule transplantation.Methods Through the application of breast three dimensional scanning technology was applied to measure the breast volume before operation and at 1 month,3 months,6 months after operation with autologous fat transplantation,thereby calculating the absorption rate of autologous fat.Results By measuring the breast volume of 30 female patients with autologous fat transplantation for breast augmentation,We figured out the rates of fat absorption at 1 month,3 months and 6 months after surgery were(35.21 ±4.43)%,(52.60 ±3.18)%and(53.78 ±3.05)%respectively.Compared with the rate at 1 month after surgery,the rates at 3 and 6 months after surgery had a statistical significance(P < 0.05).But there was no difference by comparing the rate at 3 months with rate6 months after surgery(P > 0.05).Conclusion Application of 3D scanning technology on measuring the fat absorption rate could provide clinical references for autologous fat transplantation in the breast augmentation.更多还原