节点文献

铲式玉米播种机清种过程的离散元仿真分析

Simulation Analysis of Seeding Process for Corn Seed Metering Device Based on Discrete Element Method

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张宇李成华纪玉杰孙裕晶

【Author】 ZHANG Yu;LI Chenghua;JI Yujie;SUN Yujing;Shenyang Ligong University;Biological and Agricultural Engineering of Jinlin University;

【机构】 沈阳理工大学机械工程学院吉林大学生物与农业工程学院

【摘要】 排种器的清种过程决定铲式玉米精密播种机的排种质量,为研究铲式玉米精密播种机排种器的清种过程,建立铲式玉米精密播种机排种器的离散元法分析模型和持种空间与分种勺结构关系式。利用EDEM软件仿真分析排种器在不同转速和垂直倾角情况下对排种器清种角和重播率的影响。得到排种器工作转速和垂直倾角配合的最佳参数,并将仿真结果与试验结果进行比较,两者的数值与变化趋势基本一致,由此证明了应用EDEM分析排种器的正确性和可行性。

【Abstract】 The cleaning process determines the seeding quality of the shovel-type precision planter. To research cleaning process for Corn Seed Metering Device,the discrete analysis model of Metering Device the relation between space and one scoop of structure are established. The influence of Metering Device on angle and replay rate under the condition of different speed and vertical angle is simulated and analyzed using EDEM. Comparing the test results with the simulation result,the opital parameters of the rotation speed and the vertical angle are obtained. The numerical value and variation of the two parameters are corresponding consistent,and the correctness and feasibility of application of EDEMis proved.

【关键词】 排种器EDEM仿真试验
【Key words】 seedingEDEMsimulationtest
【基金】 国家自然科学基金资助项目(51075282)
  • 【文献出处】 沈阳理工大学学报 ,Journal of Shenyang Ligong University , 编辑部邮箱 ,2015年01期
  • 【分类号】S223.2
  • 【被引频次】7
  • 【下载频次】167
节点文献中: 

本文链接的文献网络图示:

本文的引文网络