节点文献

弱酸性起始条件合成聚乙烯醇改性脲醛树脂胶黏剂的工艺及性能研究

Study on the Process and Properties of Urea-formaldehyde Resin Adhesive Modified by Synthesized Polyvinyl Alcohol under Initial Weak Acidity Condition

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 陆立楠顾顺飞张统周宽俞丽珍

【Author】 LU Li-nan;GU Shun-fei;ZHANG Tong;ZHOU Kuan;YU Li-zhen;School of Chemistry and Material Engineering,Changshu Technical Institute;Jiangsu Laboratory of Advanced Functional Materials,Changshu Technical Institute;

【机构】 常熟理工学院化学与材料工程学院常熟理工学院化学与材料工程学院/常熟理工学院江苏省新型功能材料重点建设实验室

【摘要】 用聚乙烯醇(PVA)作为改性剂,在不同的弱酸性条件下合成脲醛树脂(UF),并用正交实验法得出了弱酸性起始条件合成聚乙烯醇改性脲醛树脂的最优工艺为:最终n(甲醛):n(尿素)=1.2:1、起始pH值为6.5、碱性阶段反应温度85℃、PVA加入量占尿素总量1%。用该工艺制备的PVA改性UF的游离甲醛含量、胶合强度均能满足GB/T 14732-2006标准要求,并且相应胶合板的甲醛释放量为4.80mg/L,达到了GB/T 9846.3-2004标准中E2级指标要求。

【Abstract】 With polyvinyl alcohol(PVA) as modifier,the synthesis technology of urea-formaldehyde resin(UF) under different initial weak acidity conditions was studied through an orthogonality experiment.The results indicated that the UF resin modified by PVA satisfied the standard of GB/T 14732—2006 and the formaldehyde emission(4.80mg/L) of corresponding plywood reached the E2 level index requirement in GB/T9846.3—2004 standard when final molar ratios of n(F):n(U) was 1.2:1.the initial pH was 6.5.the temperature of alkaline stage reaction was 85℃ and mass fractions of PVA was 1%in total urea.

【基金】 江苏省高等学校2014年大学生实践创新训练计划项目,201410333006Z
  • 【文献出处】 林产工业 ,China Forest Products Industry , 编辑部邮箱 ,2015年12期
  • 【分类号】TQ433.431
  • 【被引频次】4
  • 【下载频次】357
节点文献中: 

本文链接的文献网络图示:

本文的引文网络