节点文献

锂离子电池用水性丙烯酸酯胶粘剂的制备及性能研究

Study on preparation and properties of waterborne acrylate adhesive for Li-ion battery

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李哲李文刚高亮于兆强

【Author】 Li Zhe;Li Wengang;Gao Liang;Yu Zhaoqiang;Fiber Material Modification State Key Laboratory,Material Institute of Donghua University;

【机构】 东华大学材料学院纤维材料改性国家重点实验室

【摘要】 采用乳液聚合法制得水性丙烯酸酯胶粘剂。探讨了配方条件对该胶粘剂粘接性能的影响。研究结果表明:当w(软单体)=45%、w(亲水单体)=25%、w(乳化剂)=0.4%和w(引发剂)=0.7%(均相对于单体总质量而言)时,水性丙烯酸酯胶粘剂的粘接性能相对最好;将该胶粘剂用作锂离子电池的胶粘剂时,锂离子电池经50次循环后的放电比容量为422.2 m Ah/g,表现出较稳定的电池性能和较好的充放电效率。

【Abstract】 A waterborne acrylate adhesive was prepared by emulsion polymerization method. The influences ofthe formula conditions on bonding properties of adhesives were discussed. The research results showed that thewaterborne acrylate adhesive had the relatively best bonding properties when mass fractions of soft monomer,hydrophilic monomer,emulsifier and initiator were 45%,25%,0.4% and 0.7% respectively in total monomers. The Li- ion battery had the more stable battery properties and the better charge- discharge efficiency because thedischarge specific capacity of Li-ion battery was 422.2 m Ah/g after 50 cycles when the adhesive was used as theadhesive of Li-ion battery.

  • 【文献出处】 中国胶粘剂 ,China Adhesives , 编辑部邮箱 ,2015年12期
  • 【分类号】TQ433.43;TM912
  • 【被引频次】6
  • 【下载频次】455
节点文献中: 

本文链接的文献网络图示:

本文的引文网络