节点文献

湿加松木材防腐可处理性研究

Preservative Treatability of Pinus elliottii×P. caribaea Wood

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 王剑菁马红霞陈利芳何雪香张燕君

【Author】 WANG Jianjing;MA Hongxia;CHEN Lifang;HE Xuexiang;ZHANG Yanjun;Guangdong Academy of Forestry;

【机构】 广东省林业科学研究院

【摘要】 采用真空法对湿加松(Pinus elliottii×P.caribaea)木材进行防腐处理,研究不同防腐处理工艺防腐处理效果、树干不同离地高度木材和径向不同部位木材防腐可处理性的差异。结果表明防腐处理工艺、树干离地高度和径向不同部位均对湿加松木材载药量有显著影响(P<0.01)。防腐处理工艺的处理时间、真空度是影响湿加松防腐可处理性的主要因素。湿加松径向内层载药量显著高于外层(P<0.05);湿加松径向木材和枝下高部分(0~9.3 m)轴向木材的载药量与木材气干密度呈负相关;树干离地高度为9.3~11.3 m的湿加松木材载药量最小。

【Abstract】 Preservative treatability of Pinus elliottii×P.caribaea wood was studied in this paper. Results showed that both treatment processes and wood position had great effect on P. elliottii×P.caribaea wood preservation treatability. Vacuum degree and treatment time were the main factors of wood preservation treatability; the preservative retention of wood from inner annual layer is higher than that of wood from outer annual layer;and there was an evident negative correlation between wood density and the treatability of samples from different trunk position(radial direction and wood at height under branch). Samples at 9.3~11.3 m above ground were more difficult to treat than other wood section.

【基金】 广东省林业科技创新专项资金项目“湿加松多功效木材防护关键技术研究”(2012KJCX012-02),“合成树脂增强木材保护技术研究”(2014KJCX014)
  • 【文献出处】 广东林业科技 ,Guangdong Forestry Science and Technology , 编辑部邮箱 ,2015年02期
  • 【分类号】S782.33
  • 【被引频次】5
  • 【下载频次】94
节点文献中: 

本文链接的文献网络图示:

本文的引文网络