节点文献

退火温度对5182车用铝合金冷轧板的组织及性能的影响

Influence of Annealing Temperature on Microstructure and Properties of Cold-rolled 5182 Aluminum Alloy Sheets

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 史朝阳王游根邓盛卫陈琳黄光胜

【Author】 SHI Zhaoyang;WANG Yougen;DENG Shengwei;CHEN Lin;HUANG Guangsheng;College of Materials Science and Engineering,National Engineering Research Center for Magnesium Alloys,Chongqing University;Southwest Aluminum (Group)Co.,Ltd.;

【机构】 重庆大学材料科学与工程学院重庆大学国家镁合金材料工程技术研究中心西南铝业(集团)有限责任公司

【摘要】 对5182铝合金冷轧板材进行了不同温度退火处理及退火后的单向拉伸试验、杯突试验以及微观组织表征。结果表明:随着退火温度的升高,屈服强度和抗拉强度逐渐降低,在300~325℃范围内,分别由原来的240MPa、379 MPa快速降低到114 MPa、258 MPa;杯突值由原来的5.77mm提高到了8.75mm;同时,应变硬化指数也大幅度提高,当退火温度达到325℃,并保温30min,冷轧板材已经发生了完全再结晶。

【Abstract】 Through uniaxial tensile test,Erichsen test and microstructure characterization,the effects of different annealing temperature on microstructure and properties of cold-rolled 5182 aluminum alloy sheets were investigated.The results show that with increasing annealing temperature,yield strength and tensile strength of 5182 alloy sheets reduce gradually,and within the scope of the 300 ℃to 325 ℃,rapidly from the original 240 MPa and 379 MPa to 114 MPa and 258 MPa,respectively;the Erichsen value increases from 5.77 mm to 8.75 mm.Stress-strain index also increases significantly.When annealed at 325 ℃for 30 min,the cold rolled sheet recrystallizes completely.

【基金】 中央高校基本科研业务费(CDJZR14130009)
  • 【分类号】TG166.3;TG339
  • 【被引频次】11
  • 【下载频次】253
节点文献中: 

本文链接的文献网络图示:

本文的引文网络