节点文献

生物质高温气化重整制氢实验研究

HYDROGEN PRODUCTION OF BIOMASS HIGH STEAM TEMPERATURE GASIFICATION AND REFORMING

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 高宁博李爱民全翠

【Author】 Gao Ningbo;Li Aimin;Quan Cui;School of Environmental & Biological Science & Technology,Dalian University of Technology,Key Laboratory of Industrial Ecology and Environmental Engineering,MOE;State Key Laboratory of Multiphase Complex Systems;

【机构】 大连理工大学环境学院,工业生态与环境工程教育部重点实验室多相复杂系统国家重点实验室,中国科学院过程工程研究所

【摘要】 在自行设计的固定床气化炉实验台上开展序批式进料模式的生物质(白松木屑)高温气化实验研究,重点考察反应温度、水蒸气流率以及物料粒径等不同工况条件对生物质气化产气特性的影响,实验结果表明,在800~950℃的范围内,每千克白松木屑的氢产率为21.91~71.63g H2。不同水蒸气流率下H2平均浓度变化不大,CO平均浓度随水蒸气流率的增加略有增大,气体平均热值在11.87~12.04kJ/m3内变化。实验条件下水蒸气流率为20.2g/min时的氢气产率最大。随着生物质给料粒径的减小,气体产率和气化效率均减小。

【Abstract】 The type of sequence batch biomass( pine dust) high steam temperature gasification was studied on fixed-bed gasifier combined with a porous ceramic reformer. Reaction temperature,steam flow rate and particle sizes as different effect factors were studied on producer gas composition. The experimental results showed that H2 production increases from 21. 91 g /kg biomass to 71. 63 g /kg biomass as reaction temperature increases from 800 to 950℃. With increase of steam flow rate,the average value of concentration of H2 shows slight fluctuation. The concentration of carbon monoxide increase slightly and low heating value( LHV) changed between 11. 87 and 12. 04 kJ /m3,H2 production reach maximum value as steam flow rate is 20. 2g /min. Producer gas production declined with decreasing particle sizes of biomass.

【关键词】 生物质气化重整制氢
【Key words】 Biomassgasificationreforminghydrogen production
【基金】 国家自然科学基金青年基金(51006018);中国博士后科学基金特别资助项目(201003616);多相复杂系统国家重点实验室开放基金(MPCS-2011-D-11)
  • 【文献出处】 太阳能学报 ,Acta Energiae Solaris Sinica , 编辑部邮箱 ,2014年05期
  • 【分类号】TQ116.2
  • 【被引频次】5
  • 【下载频次】349
节点文献中: 

本文链接的文献网络图示:

本文的引文网络