节点文献

硅切割废砂浆制备硅溶胶及回收碳化硅的工艺研究

Study on the preparation process of silica sol and the recyling of silicon carbide by cutting silicon crystal

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 王娟彭倩丁玉强

【Author】 WANG Juan;PENG Qian;DING Yu-qiang;School of Chemistry and Material Engineering,Jiangnan University;

【机构】 江南大学化学与材料工程学院

【摘要】 以硅切割废砂浆中硅粉为来源,制备较高浓度硅溶胶,并回收得到高纯度碳化硅。结果表明,制备硅溶胶的最佳实验条件为:反应温度90℃,硅粉活化时间5 min,反应时间1 h,废油砂∶蒸馏水∶碱=10∶30∶0.6(质量比)。

【Abstract】 Silicon powder in cutting waste mortar silicon as source the high concentration silica sol was prepared. And recovered the high purity silicon carbide. The result shows that the optimum condition obtained as follows: the reaction temperature is 90 ℃,the activation time of silicon powder is 5 min,the reaction time is 1 h,the mass ratio of the waste residue,water and sodium hydroxide is 10∶ 30∶ 0. 6.

【基金】 江苏省科技支撑计划(BE2012023)
  • 【文献出处】 应用化工 ,Applied Chemical Industry , 编辑部邮箱 ,2014年05期
  • 【分类号】TQ127.2
  • 【被引频次】3
  • 【下载频次】155
节点文献中: 

本文链接的文献网络图示:

本文的引文网络