节点文献

Si及Sb对铸态Mg-Al-Si合金组织和力学性能的影响

Effects of Si and Sb on microstructures and mechanical properties of as-cast Mg-Al-Si alloys

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 宋佩维白玫

【Author】 SONG Pei-wei;BAI Mei;School of Materials Science and Engineering,Shaanxi University of Technology;Xi’an Railway Bureau,Xi’an Construction Section;

【机构】 陕西理工学院材料科学与工程学院西安铁路局西安工务段

【摘要】 用普通铸造法制备不同Al、Si含量的Mg-Al-Si三种合金,研究了Si含量和微量Sb对合金组织和力学性能的影响。结果表明:随着Si含量增加,合金中的Mg2Si逐渐变粗大,合金力学性能逐渐提高。添加0.75%Sb后,三种合金均产生Mg3Sb2相,粗大的Mg2Si得到细化,呈相对弥散分布,合金的屈服强度和抗拉强度进一步提高。拉伸断裂形式为准解理脆性断裂。

【Abstract】 Three kinds of Mg-Al-Si alloys with different Al and Si content are prepared by the gravity casting. Effects of Al and Si contents on Microstructure andmechanical propertiesat room temperature of the ascast alloys are investigated. The results show that the Mg2Si becomes bulky by increasing Si content in alloy and the hardness,yield strength and ultimate tensile strength of alloys increases. The Mg3Sb2 phase is formed in the microstructures of alloys after adding 0. 75% Sb. The Mg2Si particle gradually gets refined and shows a relative dispersion distribution in matrix( α-Mg),which further increases the tensile strength and the yield strength of alloys. The fracture of the alloys is characterized by quasi-cleavage brittle.

【关键词】 Mg-Al-Si合金Mg2SiSb显微组织力学性能
【Key words】 Mg-Al-Si alloyMg2SiSbmicrostructuremechanical property
【基金】 陕西省教育厅科学研究计划项目(2010JK470)
  • 【文献出处】 陕西理工学院学报(自然科学版) ,Journal of Shaanxi University of Technology(Natural Science Edition) , 编辑部邮箱 ,2014年03期
  • 【分类号】TG146.22
  • 【被引频次】3
  • 【下载频次】101
节点文献中: 

本文链接的文献网络图示:

本文的引文网络