节点文献

柴油机控制用燃烧状态分析单元开发研究

Development of Control-Oriented In-Cylinder Combustion Analysis Unit for Diesel Engine

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 方成高国景杨福源项旭昇李进

【Author】 FANG Cheng;GAO Guo-jing;YANG Fu-yuan;XIANG Xu-sheng;LI Jin;State Key Laboratory of Automotive Safety and Energy,Tsinghua University;Dongfeng Commercial Vehicle Technical Center;Changzhou ECTEK Automotive System Co.,LTD.;

【机构】 清华大学汽车安全与节能国家重点实验室东风商用车技术中心常州易控汽车电子有限公司

【摘要】 基于MPC5644A单片机开发了新一代的柴油机燃烧状态分析单元:使用曲轴转速信号得到0.2°CA的缸压采集触发信号,实时采集各缸缸内压力信号,并合理分配计算负荷,计算出控制所需的燃烧状态指标。在中型高压共轨柴油机上的试验表明:该基于MPC5644A的柴油机燃烧状态分析单元,能够实时采集缸压信息并计算出瞬时燃烧放热率、累积燃烧放热率、指示平均有效压力和50%放热点等燃烧状态指标,满足基于缸压信息的柴油机控制的要求。

【Abstract】 Based on MPC5644A microcontroller,a new in-cylinder combustion analysis unit was developed.The unit took cylinder pressure signal once every 0.2°CA,and calculate combustion indexes according to the pressure and its position information cycle by cycle.Verification test in a 4.75Lcommon rail diesel engine demonstrates that the unit successfully acquires the real-time information and provides the combustion indexes,such as instantaneous and integrated heat release rate,IMEP,CA50,etc.,satisfying the control requirements of diesel engine.

  • 【文献出处】 内燃机工程 ,Chinese Internal Combustion Engine Engineering , 编辑部邮箱 ,2014年01期
  • 【分类号】TK421.2
  • 【被引频次】11
  • 【下载频次】177
节点文献中: 

本文链接的文献网络图示:

本文的引文网络