【摘要】 圆锥曲线重新参数化可以提高曲线参数的均匀性,且增强在拼接点处的光滑性.常用的参数化方法是采用一次有理多项式或二次有理多项式.采用三次有理多项式对圆锥曲线重新参数化,使曲线的次数由二次升到六次.以圆弧为例所得的实验结果袁明,在两段圆弧的公共点处的连续性为C~3,而且三次有理多项式参数化与弧长参数化的弦长偏差相比二次有理多项式参数化减小两个数量级.更多还原

【Abstract】 Reparametrization of conies can make the parameter as uniform as possible and improve the smoothness at the junction points.The common ways are to use linear rational polynomials or quadratic rational polynomials.In the paper,a cubic rational polynomial is used to reparametrize the conic section,which triples the degree of quadratic rational curve.Experimental results obtained by the parametrization of the circular arcs show that the continuity at the junction point of two circular arcs can reach C3 and the deviation between the parametrization presented in the paper and the arc length parametrization has been reduced about two orders of magnitude,compared with the quadratic rational polynomial parametrization.更多还原