节点文献

Si含量对22SiMnCrNi2Mo钢组织和性能的影响

Effect of Si Content on Microstructure and Properties of 22SiMnCrNi2Mo Steel

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 王青刘群欧梅桂

【Author】 WANG Qing;LIU Qun;OU Mei-gui;School of Materials Science and Metallurgy Engineering, Guizhou University;

【机构】 贵州大学材料科学与冶金工程学院

【摘要】 利用光学显微镜、扫描电镜、硬度计等研究了Si含量对潜孔钻头用钢22SiMnCrNi2Mo组织和性能的影响。实验结果表明:实验钢的强度、硬度在Si含量为1.20%到1.40%的范围内随Si含量的上升而增强,冲击韧性随Si含量的升高而下降,三种不同硅含量下的组织均为回火马氏体+少量的残余奥氏体,马氏体束尺寸随硅含量增加而减小。

【Abstract】 the effects of Si content on DTH bit affect the microstructure and properties of steel 22SiMnCrNi2 Mo by using optical microscope, scanning electron microscope, microhardness. The experimental results show that: strength,hardness of the steel in the Si content of 1.20% to increase with the Si content in the range of 1.40% and increase,increase the impact toughness decreases with Si ratio, three different silicon content organization for tempering martensite and a small amount of retained austenite, martensite beam size decreases the increase of silicon content.

【关键词】 Si含量22SiMnCrNi2Mo钢性能
【Key words】 Si content22SiMnCrNi2Mo steelperformance
【基金】 贵阳市科技局基金项目(编号:筑科合同(2012101)2-5号,筑科合同(2012207)03号);贵州大学“SRT计划”项目(编号:贵大SRT字(2012)114号)
  • 【文献出处】 装备制造技术 ,Equipment Manufacturing Technology , 编辑部邮箱 ,2014年07期
  • 【分类号】TG142.1
  • 【被引频次】2
  • 【下载频次】68
节点文献中: 

本文链接的文献网络图示:

本文的引文网络