节点文献

热处理对含Ce镁合金组织和硬度的影响

Effects of Heat Treatment on Microstructure and Hardness of Mg-alloy with Ce

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 邓正华刘江李万全

【Author】 DENG Zhenghua;LIU Jiang;LI Wanquan;College of Mechanical Engineering, Chongqing Three Gorges University;

【机构】 重庆三峡学院机械工程学院

【摘要】 通过添加Ce到镁合金Mg-9%Al中,研究了Ce加入量及热处理对镁合金组织和硬度的影响。结果表明,随着Ce加入量增加,合金硬度增加;随着固溶时间的增加,合金硬度先增加后降低,而经过24 h固溶处理的合金硬度随时效时间的增加而缓慢增加,并最终趋于平稳。

【Abstract】 Adding Ce into Mg-alloys, the hardness of Mg-9%Al alloy with different addition of Ce was measured. And the effect of heat treatment on Mg-9%Al-1%Ce alloy was analysed. The results show that the hardness of Mg-alloy rises with the increase of Ce addition. With the increase of solution time, the hardness of Mg-alloy presents the trend of first increasing then decreasing, but after 24h solid solution treatment, the hardness of alloy rises slowly with the increase of the aging time, and finally reach a steady-state.

【关键词】 镁合金Ce固溶处理时效处理硬度
【Key words】 magnesium alloycesolid solution treatmentaging treatmenthardness
【基金】 重庆市教委科学技术研究基金资助项目(KJ121116);东南大学创新基金资助项目(0941701);重庆三峡学院青年基金资助项目(12QN20)
  • 【文献出处】 铸造技术 ,Foundry Technology , 编辑部邮箱 ,2013年09期
  • 【分类号】TG146.22
  • 【下载频次】138
节点文献中: 

本文链接的文献网络图示:

本文的引文网络