节点文献

一种基于微带与槽线过渡结构的超宽带功分器

Design of a UWB Power Divider Based on Microstrip/Slot-line Transition Structure

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 杨自强陈涛彭浩杨涛刘宇

【Author】 YANG Ziqiang;CHEN Tao;PENG Hao;YANG Tao;LIU Yu;School of Electronic Engineering,University of Electronic Science and Technology of China;

【机构】 电子科技大学电子工程学院

【摘要】 提出了一种基于微带与槽线过渡结构的超宽带180°型3dB功分器,采用扇形过渡结构替代传统的圆形过渡结构,拓展了功分器的工作带宽。该功分器仿真和测试结果吻合良好,在3.1~10.6GHz频带内实现了插入损耗小于1.5dB,两输出口的幅度误差小于0.8dB,相位误差小于1°,输入端口反射系数小于-12dB。

【Abstract】 This paper present an ultra-wide-band 180°power divider based on transition between microstrip and slot-line to achieve ultra-wideband 3dB power distribution.In order to expand the bandwidth of the power divider,the fan-shaped transition structure is used in this workin instead of the traditional round transition structure.The simulation results and the measurement results are agreed well.The insertion loss of less than 1.5dB at the frequency range of 3.1~10.6GHz has been obtained.The amplitude balance is less than 0.8dB and the phase balance is less than 1°between the two output ports;the reflection coefficient at the input port is less than-12dB.

【基金】 中央高校基本科研业务费基金资助项目(ZYGX2010J026);自然科学基金青年科学基金资助项目(61006026)
  • 【文献出处】 压电与声光 ,Piezoelectrics & Acoustooptics , 编辑部邮箱 ,2013年06期
  • 【分类号】TN626
  • 【被引频次】11
  • 【下载频次】334
节点文献中: 

本文链接的文献网络图示:

本文的引文网络