节点文献

物料运输车底架的应变测试研究

Research on Strain Test of Underbed of a Material Truck

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 陈玲舒大文张毅杰章继楠陈寅鸣龙苗

【Author】 CHEN Ling1,SHU Dawen1,ZHANG Yijie2,ZHANG Ji nan3,CHEN Yinming3,LONG Miao1(1.College of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Kunming 650093, China;2.College of Engineering and Technology,Yunnan Agricultural University,Kunming 650201,China; 3.Kunming China Railway Large Maintenance Machinery Group Co.,Ltd,Kunming 650215,China)

【机构】 昆明理工大学机电工程学院云南农业大学工程技术学院昆明中铁大型养路机械集团有限公司

【摘要】 由于物料运输车底架的结构和实际使用条件较为复杂,在对底架的强度及变形进行理论计算时,需做一些假设和较多的简化,所得出的计算结果往往与实际情况相差较大。因此,本文用试验的方法对物料运输车底架的强度与变形进行了研究,在运输车满载运行后的静态情况下,应用电阻应变仪测量法分别实测了底架关键部位的应变,得出了实际应力值,为验证底架改进设计提供了技术依据。

【Abstract】 Owing to the structure of the underbed and the actual service conditions of a material truck are relatively complicated,some supposes and simplifications are required when the strength and deformation of the underbed are calculated,there will always be big errors between the final results and the actual ones.Consequently,research on strength and deformation of a material truck underbed based on experimental method was done in this paper.On the condition of static state of truck full load,the strain of the key part was measured with resistance strain gauge,and the actual stress values were obtained,which provided the technical basis for improving check design that whether the design of the underbed meets the strength requirements.

【关键词】 物料运输车底架强度应变测试
【Key words】 material truckunderbedstrengthstain test
  • 【文献出处】 新技术新工艺 ,New Technology & New Process , 编辑部邮箱 ,2013年03期
  • 【分类号】U215.6
  • 【下载频次】36
节点文献中: 

本文链接的文献网络图示:

本文的引文网络