节点文献

多面体低聚倍半硅氧烷-ZrO2复合气凝胶的制备与表征

Preparation and characterization of polyhedral oligomeric silsesquioxane-zirconia aerogels

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 黄闯闯魏志军张林罗炫任洪波罗美明

【Author】 Huang Chuangchuang1,2,Wei Zhijun1,2,Zhang Lin1,Luo Xuan1,Ren Hongbo1,Luo Meiming2(1.Science and Technology on Plasma Physics Laboratory, Research Center of Laser Fusion,CAEP,Mianyang 621900,China; 2.College of Chemistry,Sichuan University,Chengdu 610064,China)

【机构】 中国工程物理研究院激光聚变研究中心,等离子体物理重点实验室四川大学化学学院

【摘要】 以官能团化的多面体低聚倍半硅氧烷(POSS-[C2H4Si(OEt)3]8)和正丁醇锆为原料,以乙醇作为溶剂,通过溶胶-凝胶及二氧化碳超临界干燥成功制备了三种不同锆含量POSS-ZrO2的复合气凝胶。并用傅里叶变换红外光谱分析仪(FTIR)、扫描电镜(SEM)、X射线衍射仪(XRD)和比表面吸附仪(BET)对其进行表征。结果表明:该气凝胶中有Si—O—Zr键,并且所得气凝胶都是无定型的,其比表面积随着锆含量的增加而变小,最高可达491 m2/g,并且其孔径分布都比较广。

【Abstract】 The polyhedral oligomeric silsesquioxane(POSS)-zirconia aerogels which contain three different contents of zirconia were successfully prepared from the POSS-[C2H4Si(OEt)3]8 and Zr(OC4H9)4 by the sol-gel process and subsequently supercritical drying with carbon dioxide.Ethanol was used as the solvent during the process.The samples were characterized by FTIR,SEM,XRD and BET.The results indicate that the three samples all have homogeneous Si-O-Ti bonds,and they are amorphous.The BET surface areas decrease with the increasing of the contents of zirconia,the biggest surface area is 491 m2/g,and all the pore distributions of the three samples are broad.

【基金】 国家自然科学基金委员会-中国工程物理研究院联合基金项目(10976020);中国工程物理研究院科学技术发展基金项目(2012A032015,2012B032050)
  • 【文献出处】 强激光与粒子束 ,High Power Laser and Particle Beams , 编辑部邮箱 ,2013年08期
  • 【分类号】TL632
  • 【被引频次】4
  • 【下载频次】137
节点文献中: 

本文链接的文献网络图示:

本文的引文网络