节点文献

重苯加氢轻质化实验研究

Study on Hydrogenation Process for Heavy Benzol Conversion to Light Fraction under Laboratory Conditions

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 杜雄伟王兆文申峻凌开成

【Author】 Du Xiongwei1,Wang Zhaowen1,Shen Jun2 and Ling Kaicheng2(1.Taiyuan Coal Gasification(Group) Co.,Ltd.,Taiyuan Shanxi 030024,China; 2.Taiyuan University of Technology,Taiyuan Shanxi 030024,China)

【机构】 太原煤炭气化(集团)有限责任公司太原理工大学

【摘要】 利用管式反应釜共振反应装置,研究了某焦化厂重苯200℃后馏分的加氢轻质化反应。考察了催化剂种类及用量、反应温度、氢初压等工艺条件对重苯轻质化的影响。结果表明,使用钼酸铵、Ni-Mo催化剂时,均能起到加氢轻质化的效果,其中Ni-Mo催化剂的催化效果优于钼酸铵。最佳的工艺条件为使用Ni-Mo催化剂、催化剂用量2%~3%、氢初压7 MPa、反应温度450℃。

【Abstract】 The process of the fraction of heavy benzol above 200 ℃ conversion to light fraction was studied by using resonance reaction device.The effects of the reaction condition,including reaction temperature,initial H2 pressure,and the type and amount of the catalyst,on the hydro-upgrading process were investigated.The results showed that both ammonium molybdate and Ni-Mo catalysts have good catalytic effects on the hydrogenation process for heavy benzol conversion to light fraction.Under the same reaction conditions,the catalytic effect of the Ni-Mo catalyst was better than that of ammonium molybdate catalyst.As the sample oil was 5 mL,over the Ni-Mo catalyst,the best reaction conditions were as follows: 0.15 g of catalyst,7 MPa of initial H2 pressure,and 450 ℃ of reaction temperature.

  • 【文献出处】 煤化工 ,Coal Chemical Industry , 编辑部邮箱 ,2013年03期
  • 【分类号】TQ522.62
  • 【被引频次】4
  • 【下载频次】153
节点文献中: 

本文链接的文献网络图示:

本文的引文网络