节点文献

原子荧光法测定工业硫酸中砷含量

HG-AFS for determination of arsenic in industrial sulphuric acid

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 邱爱玲范晓明邹惠玲陈洪金谭砂砾

【Author】 QIU Ailing 1,FAN Xiaoming 2,3,ZOU Huiling 2,3,CHEN Hongjin 2,TAN Shali 4(1.Research Institute of Nanjing Chemical Industrial Group,Nanjing,Jiangsu,210048,China;2.Food Chemical Center of Product Quality Supervision and Inspection Institute of Shandong Province,Jinan,Shangdong,250100,China;3.Key Laboratory of Materials Chemistry Safety Inspection Technology of Shandong Province,Jinan,Shangdong,250100,China;4.Environmental Science and Engineering College of Shandong University,Jinan,Shangdong,250100,China)

【机构】 南化集团研究院山东省产品质量监督检验研究院食品化工中心山东省材料化学安全检测技术重点实验室山东大学环境科学与工程学院

【摘要】 采用HG-AFS法对工业硫酸中的砷含量的测定方法进行了研究,对优化HG-AFS法的测定条件进行了探讨。本方法检出限为0.022μg/L,试样的加标回收率范围为92.2%~106.3%。测定过程中体系的酸度对测定结果有一定的影响,砷的荧光强度随着酸度的增加而增大,当体系酸度在5%左右时,测定结果相对稳定。结果表明,本实验方法具有检出限低、精密度和准确度高、操作简捷等特点。

【Abstract】 The Hydride generation-atomic fluorescence spectrometry for determination of arsenic content in industrial sulphuric acid was studied and the optimization of determination conditions was discussed.The detection limit of this method was 0.022 μg/L and the recovery of spiked samples ranged from 92.2% to 106.3%.The acidity of the system during the measurement had some influence on the determination results.The arsenic fluorescence intensity increased with acidity.When the system acidity was at about 5%,the determination results were relatively stable.The results showed that the method had some advantages including low detection limit,high precision and accuracy,simple operation,etc.

  • 【文献出处】 硫酸工业 ,Sulphuric Acid Industry , 编辑部邮箱 ,2013年03期
  • 【分类号】TQ111.16;O657.31
  • 【被引频次】3
  • 【下载频次】99
节点文献中: 

本文链接的文献网络图示:

本文的引文网络