节点文献

Cu含量对Al-9.0Zn-1.5Mg-xCu合金淬火敏感性的影响

Influence of Cu content on quenching sensitivity of Al-9.0Zn-1.5Mg-xCu alloys

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张新明王雷刘胜胆欧阳惠胡继龙

【Author】 Zhang Xinming;Wang Lei;Liu Shengdan;Ouyang Hui;Hu Jilong;School of Materials Science and Engineering,Central South University;Key Laboratory of Nonferrous Materials Science and Engineering,Ministry of Education,Central South University;

【机构】 中南大学材料科学与工程学院中南大学 教育部有色金属材料科学与工程重点实验室

【摘要】 通过末端淬火试验,结合金相显微镜、透射电子显微镜和差示扫描量热法,研究了Cu含量(0~2.0%)对Al-9.0Zn-1.5Mg-xCu合金淬火敏感性的影响。研究结果表明,随着Cu含量的增加,合金的淬火敏感性增大,Cu含量由1.5%增加到2.0%时,合金的淬透层深度由大约80 mm降低到40 mm。随着Cu含量的增加,其第二相析出的峰值温度、起始温度以及终止温度均提高了,同时析出温度范围也变宽了。

【Abstract】 Influence of Cu(0-2.0%) content on quenching sensitivity of Al-9.0Zn-1.5Mg-xCu alloys was investigated by an end-quenching test method,optical microscopy,transmission electron microscopy and differential scanning calorimetry.The results show that the quenching sensitivity increases with increase of Cu content;When Cu content increases from 1.5% to 2.0%,the hardened depth of the alloy reduces from about 80 mm to 40 mm.With increase of Cu content,the peak temperatures,the starting and the end of the second phases precipitation are all raised,and the precipitation temperature range is also extended.

【基金】 国家973重点基础研究发展计划项目(2012CB619500)
  • 【文献出处】 金属热处理 ,Heat Treatment of Metals , 编辑部邮箱 ,2013年11期
  • 【分类号】TG146.21
  • 【被引频次】9
  • 【下载频次】214
节点文献中: 

本文链接的文献网络图示:

本文的引文网络