节点文献

一种可靠的功率器件绝缘与热传导路径设计

A reliable design on insulation and thermal conduction path of power device

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 杨年法刘钢盛占石陈亮徐涛

【Author】 YANG Nian-fa,LIU Gang,SHENG Zhan-shi,CHEN Liang,XU Tao(School of Electrical Information & Engineering,Jiangsu University,Zhenjiang 212013,China)

【机构】 江苏大学电气学院

【摘要】 通过测试相同工作条件下同一IGBT在不同大小的铜块下的管壳和散热片的温度,计算每次传导路径中的热阻,分析热阻和接触面大小的关系。根据这一关系推算出功率器件在安全的温度范围内工作所需要的铜块大小,利用FLOTHERM专业热仿真软件验证这个结论的可行性;实测了实验条件下的功率器件的温度,仿真结果与实验结果基本符合。

【Abstract】 By testing the Case and the heat sink temperature of the same IGBT under the same conditions in the shells of different sizes of copper,thermal resistance of each conductive path is calculated to analyse the relationship between thermal resistance and the contact surface size.The size of the copper block power devices required for the safe temperature range is calculated according to this relationship,the feasibility of this conclusion is verified by FLOTHERM,a professional thermal simulation software.Finally,the temperature of power devices is measured,which is basically in line with the simulation.

【关键词】 功率器件绝缘热传导热阻
【Key words】 power deviceinsulationthermal conductivityresistance
  • 【文献出处】 电焊机 ,Electric Welding Machine , 编辑部邮箱 ,2013年02期
  • 【分类号】TM22
  • 【被引频次】2
  • 【下载频次】104
节点文献中: 

本文链接的文献网络图示:

本文的引文网络