节点文献

鱼雷罐倒T形喷吹脱硫水模试验研究

Hydraulics Simulating Study on Melt Desulphurization by T Shaped Injection Lance in Torpedo Ladle Car

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李明晖欧阳德刚邓品团朱善合罗巍

【Author】 LI Ming-hui1,OUYANG De-gang1,DENG Pin-tuan2,ZHU Shan-he1,LUO Wei1(1.Rrsearch and Development Center,Wuhan Iron and Steel Group Co.,Wuhan 430080,China;2.Steel-making General Factory,Wuhan Iron and Steel Group Co.,Wuhan 430083,China)

【机构】 武汉钢铁集团公司研究院武汉钢铁集团公司炼钢总厂

【摘要】 通过水力模型试验,分析了鱼雷罐倒T形喷吹脱硫过程中熔池内的流动状态,研究了工艺参数对鱼雷罐倒T形喷吹脱硫混匀时间的影响规律。结果表明,鱼雷罐倒T形喷吹脱硫过程中2支上升流股相互影响,会消耗部分能量,不利于搅拌动能的充分发挥;试验条件下,随着喷吹气体流量的增加,熔池内液体的混匀时间显著降低,当喷吹气体流量增加至3 m3/h后,混匀时间随喷吹气体流量略有增加;随着喷枪插入深度的增大,熔池内液体的混匀时间逐渐降低。

【Abstract】 The flow state and effects of process parameters on mixing time in TDS was studied by hydraulic model experiment.The results show that the mutual influence of two blowing gas-liquid flows restrains the paly of stirring energy;with the increase of gas flow,the mixing time decrease rapidly;after the gas flow reaching 3m3/h,the mixing time is affected slightly;with the increase of the depth of injection lance,the mixing time shorts gradually.

  • 【文献出处】 铸造技术 ,Foundry Technology , 编辑部邮箱 ,2012年05期
  • 【分类号】TF703
  • 【被引频次】6
  • 【下载频次】50
节点文献中: 

本文链接的文献网络图示:

本文的引文网络