节点文献
云南某难选铜矿的选矿工艺研究
Mineral Processing Technology Research on a Refractory Copper Ore of Yunnan
【摘要】 云南某铜矿原矿含铜1.68%,铜的氧化率为19.64%,其中结合氧化铜占13.69%,是一种复杂难选的硫化铜混合矿。由于铜泡石在矿石中含量较高,难以活化,因而精矿回收率仅为80%左右。考虑技术经济因素,较为合理的分选流程是采用原矿磨矿细度70%-74μm单一浮选流程,可获得铜精矿品位为32.23%、铜回收率为78.48%的选矿指标。
【Abstract】 A copper ore containing 1.68% Cu with oxidation rate of 19.64%,in which combined copper oxide accounts for 13.69%,is a complex and refractory copper sulphide ore.As a result of tyrolite in ore with higher content,it is difficult to be activated,thus concentrate recovery rate was only about 80%.Considering the technical and economic factors,the ore is ground to a fineness of 70% below 74 μm followed by single flotation process,and it is considered to be a reasonable sorting process,finally the copper concentrate grading 32.23% Cu was obtained,at recovery of 78.48% Cu.
【Key words】 copper ore; mixed ore; tyrolite; mineral processing technology;
- 【文献出处】 有色金属(选矿部分) ,Nonferrous Metals(Mineral Processing Section) , 编辑部邮箱 ,2012年06期
- 【分类号】TD952.1
- 【被引频次】8
- 【下载频次】159