节点文献

分步滴定法制备YAG荧光粉

Preparation of YAG∶Ce Yellow Phosphor by Step-by-sty Precipitation Method

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 关荣锋李帅谋李勤勤

【Author】 GUAN Rong-feng,LI Shuai-mou,LI Qin-qin(Henan Polytechnic University,School of Materials Science and Engineering,Jiaozuo 454000,China)

【机构】 河南理工大学材料科学与工程学院

【摘要】 采用分步滴定沉淀法在室温下制备Y3-xCexAl5O12荧光粉,采用0.1mol/L的碳酸氢铵和氨水做为沉淀剂,将其分步滴入金属盐离子混合液中。研究了pH、助熔剂浓度、溶剂等对荧光粉发光性能的影响。结果表明,Ce作为激活中心,最佳掺入量为0.06,pH=8时制备出的样品发光性能最优,采用4%的氟化钠荧光粉强度最高,采用80%的乙醇代替水制备的荧光粉发光性能最好,制成的荧光粉粒径为15μm左右。

【Abstract】 Y3-xCexAl5O12 yellow phosphor was prepared by step-by-sty precipitation method,and 0.1mol/L ammonium bicarbonate and aqueous ammonia were used as precipitants.Effects of pH value,flux concertration and sovent on luminescent performance of the phosphor were investigationed.When pH value is 8,cerium content is 0.06,and 80% ethanal and 4% NaF are used as solvent and flux,respectively,YAG phosphor with the best perfprmance can be obtained.

【关键词】 发光助熔剂荧光粉分步滴定
【Key words】 luminescencefluxphosphorstep-by-sty precipitation method
【基金】 河南省基础与前沿科技项目资助(082300440150);河南省重点科技攻关项目资助(072102240027)
  • 【分类号】TQ422
  • 【下载频次】135
节点文献中: 

本文链接的文献网络图示:

本文的引文网络