节点文献

脱除硫化氢的凹凸棒石基纳米氧化锌脱硫剂的实验研究

Experimental Study on Nano-Zinc Oxide Desulfurizer With Attapulgite as Support for H2S Removal

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 王青宁韩维亮蒋金龙李澜焦林宏

【Author】 WANG Qingning1,HAN Weiliang1,JIANG Jinlong2,LI Lan1,JIAO Linhong 1(1.School of Petrochemical Engineering,Lanzhou University of Technology,Lanzhou 730050,China; 2.Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu Province,Faculty of Life Science & Chemical Engineering,Huaiyin Institute of Technology,Huaian 223003,China)

【机构】 兰州理工大学石油化工学院淮阴工学院生命科学与化学工程学院江苏省凹土资源利用重点实验室

【摘要】 采用沉淀法在凹凸棒石上负载纳米氧化锌,制得凹凸棒石基纳米氧化锌脱硫剂,用于高浓度硫化氢脱除。通过正交实验,以脱除高浓度硫化氢的硫容为目标,进行制备工艺条件的优化。结果表明,以3%(质量分数)十二烷基苯磺酸钠溶液为改性剂,用1%(质量分数)硝酸溶液酸化凹凸棒石,在温度30℃、pH值10~12下沉淀反应6h,120℃干燥,250℃焙烧3h,制得的改性凹凸棒基脱硫剂脱除高浓度硫化氢的最大硫容达到20.40%。

【Abstract】 The nano-zinc oxide desulfurizer with attapulgite as support(Z/GATB) was obtained through the sedimentation of nano-zinc oxide on attapulgite,and used for H2S removal.The preparation conditions were optimized by means of orthogonal method with sulfur content capacity for H2S removal as goal.The results showed that the optimal preparation conditions of Z/GATB were the 3% sodium dodecyl benzene sulfonate as modification agent,treatment with 1% nitric acid,the precipitation temperature of 30℃,precipitation pH value of 10-12,precipitation time of 6 h,drying temperature of 120℃,calcination temperature of 250℃ and calcinations time of 3 h,under which the Z/GATB desulfurizer could be obtained possessing the maximum sulfur content capacity of 20.40% for the removal of high concentration H2S.

【关键词】 脱硫剂纳米氧化锌凹凸棒石沉淀法
【Key words】 desulfurizernano-zinc oxideattapulgitesedimentation
【基金】 甘肃省攻关基金(2GSO47-A52-001-05);中国科学院知识创新工程重要方向项目(KZCX2-YW-Q05-05);江苏省凹土资源利用重点实验室开放研究基金项目(HPK201104)资助
  • 【文献出处】 石油学报(石油加工) ,Acta Petrolei Sinica(Petroleum Processing Section) , 编辑部邮箱 ,2012年05期
  • 【分类号】X701.3
  • 【被引频次】10
  • 【下载频次】253
节点文献中: 

本文链接的文献网络图示:

本文的引文网络