节点文献

TA1本构模型的确定

Determination of TA1 constitutive relation

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 邓将华唐超李春峰于海平江洪伟

【Author】 DENG Jiang-hua TANG Chao(School of Mechanical Engineering and Automation,Fuzhou University,Fuzhou 350108 China) LI Chun-feng YU Hai-ping JIANG Hong-wei(School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001 China)

【机构】 福州大学机械工程及自动化学院哈尔滨工业大学材料科学与工程学院

【摘要】 采用试验方法,通过准静态压缩试验和分离式Hopkinson压杆试验,获得不同应变率10-3s-1~103s-1和不同温度293K~873K范围内TA1的应力-应变曲线;基于Johnson-Cook模型对试验结果进行分析,并对其应变率强化项做出修正。结果表明,TA1为应变率敏感材料,流动应力随应变率增加而增加,随温度增加而减小;未经修正的Johnson-Cook本构模型与试验数据偏差较大,修正后的本构模型与试验值吻合较好。

【Abstract】 The stress-strain curves of TA1 under different strain rate ranges(10-3s-1~103s-1) and different temperature ranges(293K~873K) were obtained through the quasi-static compression test and split Hopkinson pressure bar test.The parameters of Johnson-Cook model were determined and the strain rate hardening term was modified.The results showed that TA1 was a kind of strain-rate sensitive materials.The flow stress increased with the increase of strain rate,while decreased with the increase of temperature.The un-amended Johnson-Cook constitutive relation had a large deviation from the test data.The modified constitutive relation had a good agreement with experimental results.

【关键词】 本构模型TA1Hopkinson压杆试验应变率
【Key words】 constitutive relationTA1SHPBstrain rate
【基金】 国家自然科学基金资助项目(50905032);中国博士后科学基金资助项目(2012M511438);福建省教育厅A类面上基金资助项目(JA09033)
  • 【文献出处】 塑性工程学报 ,Journal of Plasticity Engineering , 编辑部邮箱 ,2012年06期
  • 【分类号】TG938
  • 【被引频次】9
  • 【下载频次】340
节点文献中: 

本文链接的文献网络图示:

本文的引文网络